Print friendly | | |
| |
|
|
Print friendly |
||
|
> Service > Test marks | |||||||||||||||||||||||||||||
List of our mainly Test marks GS-Mark
Description: The GS-Mark stands for "safety tested". It certifies that a product meets the requirements of the German Equipment and Product Safety Act (GPSG), the trade associations' accident prevention regulations, DIN and EN standards as well as the general technical standards. Before a manufacturer is entitled to place the GS-Mark on his product and prior to being issued a product related certificate, the product must be examined by a recognized test house (e.g. LGA). Annual factory inspections must carried out to maintain the validity of the certificate.
LGA tested 
Description: The "LGA tested" certificate confirms that a product was tested according to selected criteria (performance characteristics, safety characteristics, statutory requirements and other individual requirements) and also meets the currently accepted technical standards. Manufacturers who wish to obtain the product certificate "LGA tested" must have their product(s) assessed within the scope of a type test, according to the above-mentioned criteria. Annual factory and product inspections must carried out to maintain the validity of the certificate.
LGA tested: EMC 
Description: Our EMC Certificates certifiy that a product meets the requirements of the EMC-Directive as well as the requirements regarding technical safety according to the German Equipment and Product Safety Act (GPSG). Surveillances are carried out.
LGA tested Quality 
Description: The "LGA tested Quality" certifies a product's high and consistant quality. It confirms the safety (e.g. electrical, harmful substances) and performance capability (e.g. functional characteristics, wear and tear, service life) of a product and therefore its comprehensive quality. Annual production surveillances ensure its consistant quality. So whenever you see the LGA Quality Certificate on a product you and the consumer can be sure that it was tested thoroughly.
Tested for harmful substances 
Description: With the certificate "tested for harmful substances" manufacturers can document that their products meet the minimum legislative requirements (e.g. Hazerdous materials regulations, the chemical prohibition regulation) as well as other LGA test requirements regarding the contents of harmful substances. On successful completion of the basic test and qualification test, the factory where the product is manufactured and the product are inspected annually.
CE-Mark 
Description: The CE-Mark (Communauté Européenne) certifies that a product conforms to the minimum requirements of the respective EC Directives. All manufacturers, no matter whether they are resident in the EU or in non-member countries, are obliged to place the CE Mark on all products which fall within the jurisiction of the EC-Directives (e.g. toys). The conformity assessment procedure can either be carried out by the manufacturer himself (manufacturer's declaration) or by a notified body (CE 0125 = LGA). The CE Mark is a purely administative mark intended to simplify the cross-frontier free trade within Europe and is not proof of quality testing. Voluntary marks such as the LGA Quality Certificate are the only marks which stand for product quality.
Copyright © 2004-2009 by LGA Shanghai Co., Ltd. - All Rights reserved. |
|
|||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||
